
Rubber & FoamSKU IP-TPEU-3X7X1-STD
TPE U Channel – 3mm x 7mm for 1mm Edges – 25m Coil
A compact black TPE U channel, 3mm wide and 7mm tall, made to finish and protect edges that are 1mm thick: thin sheet metal, light-gauge guards and covers, thin glazing, acrylic and display panels. The tall, narrow profile gives a deep 1mm slot with long gripping legs, so it holds by its own clamping force on most 1mm edges with no adhesive. At 60 Shore A it is firm enough to take knocks without squashing flat, yet flexible enough to follow curves. Supplied as one continuous 25m coil.

At a glance
- Fits edges 1mm thick
- 3mm wide x 7mm high, 1mm slot about 6mm deep, 1mm walls, rounded base
- Thermoplastic elastomer (TPE), 60 Shore A
- Recommended service range -25°C to +70°C
- Good resistance to UV, weathering, flex fatigue, tearing and abrasion
- Light: about 19g per metre
- Cuts cleanly with a sharp knife; recyclable thermoplastic
- 25m coil in black, about £17.78 per metre
Typical uses
- Covering raw 1mm sheet-steel edges on enclosures, guards, brackets and cover plates
- Protecting cables and hands from sharp edges inside control panels and machinery
- Finishing the edges of thin glazing, polycarbonate and acrylic sheets in cabinets and displays
- Edge trim on vending machine, kiosk and shop-fitting panels
- Bumper edging on light furniture, stair nosings, running boards and trims
- Stopping thin panels rattling against frames or each other
Which size do I need?
Measure the thickness of the edge you are covering and pick the channel whose slot matches it.
| U channel | Material | Fits edge thickness |
|---|---|---|
| TPE U Channel 3mm x 7mm (this one) | TPE, black | 1mm |
| Silicone Round U Channel 3mm x 5mm | Silicone, 7 colours, food-contact grade | 1mm |
| TPE U Channel 9mm x 13mm | TPE | 1mm to 2.5mm |
| TPE U Channel 8.5mm x 12mm | TPE | 1mm to 3mm |
Specification
| Property | Value | Test method / basis |
|---|---|---|
| Profile and dimensions | ||
| Profile | Round-bottom U channel (push-on edge trim) | – |
| Overall width | 3 mm | Nominal, measured across the legs |
| Overall height | 7 mm | Nominal |
| Slot (grip) width | 1 mm | Nominal |
| Slot depth | approx. 6 mm | Reference size from profile drawing |
| Wall thickness | 1 mm each side (thickest point) | Nominal |
| Fits panel / edge | 1 mm | Manufacturer's clamping range |
| Dimensional tolerance | Class E2 (cross-section), L2 (length) | ISO 3302-1 |
| Weight | approx. 19 g per metre, approx. 0.48 kg per 25 m coil | Manufacturer's datasheet |
| Material properties | ||
| Material | Thermoplastic elastomer (TPE) | – |
| Hardness | 60 Shore A | Shore A durometer (ISO 48-4) |
| Recommended service temperature | -25 °C to +70 °C | Manufacturer's datasheet for this profile |
| Base compound temperature rating | -40 °C to +90 °C | Manufacturer's compound data |
| Resistance | Weathering, UV, flex fatigue, tear, abrasion, general chemicals | Manufacturer's description (qualitative) |
| Supply | ||
| Colour | Black | – |
| Unit of sale | One continuous 25 m coil | – |
Material and compliance
This channel is extruded from a thermoplastic elastomer (TPE): a rubber-like material that flexes and recovers like rubber but, unlike vulcanised rubber, can be melted down and recycled. It stays elastic outdoors, resists UV and weathering, and keeps its shape after repeated flexing.
- Dimensional tolerances: extruded to ISO 3302-1, cross-section class E2 and length class L2.
- Recyclable: the manufacturer states the material is 100% recyclable.
- No product approvals are stated for this profile: it is not offered as food-contact, drinking-water (WRAS) or fire-rated material. If you need food-contact approval on a 1mm edge, choose the silicone round U channel 3mm x 5mm instead.
Questions about a specific application? Contact our team.
How much do I need?
Add up every edge you want to cover and allow around 5% for trimming and joints. Example: forty 1mm steel cover plates, each with a 600mm exposed edge, need 24m, or about 25.2m with allowance, so one 25m coil covers almost all of them; order two coils for the full set.
Fitting tips
- Deburr the edge and wipe it with a degreaser first: the channel grips noticeably better on a clean edge
- Start at one end and press the channel on with your thumb as you go
- Cut slightly over length with a sharp knife and push the ends together for a tight butt joint
- For edges a little under 1mm, or a permanent fit, put a thin bead of flexible adhesive in the slot
Questions
Will it stay on without glue?
On a clean 1mm edge, yes. The long legs give a deep grip, so it holds by its own clamping force. On thinner edges, or where it will be knocked often, add a flexible adhesive.
Will it fit 0.8mm or 1.2mm material?
The slot is 1mm. A 1.2mm edge will usually push in, as the TPE stretches slightly. On 0.8mm or thinner it will be loose, so use adhesive or choose a channel made for that thickness.
Can it go round corners and curves?
Yes. It follows gentle curves easily. For a sharp 90° corner, cut a small V notch out of the base at the bend, or mitre and butt two lengths.
Is it suitable for outdoor use?
Yes. TPE resists UV and weathering. Stay within the recommended -25°C to +70°C service range.
Can I use it on food equipment or with drinking water?
No approval is stated for those uses. For food-contact equipment, use our silicone round U channel 3mm x 5mm, which also fits 1mm edges.
How accurate are the dimensions?
It is extruded to ISO 3302-1 class E2, the standard precision class for rubber-like extrusions, so allow a few tenths of a millimetre either way on the nominal sizes.
Can I buy a shorter length or other colours?
This listing is a full 25m coil in black. For cut lengths, larger quantities or other colours, ask our team for a quote.
Does it lose its grip over time?
TPE recovers its shape after being compressed or stretched, and the profile is rated for good flex-fatigue resistance, so the legs keep their clamping force through repeated knocks and handling.
Need help choosing an edge trim or a seal? Contact our team.
Product details
| SKU | IP-TPEU-3X7X1-STD |
|---|---|
| Weight | 1.06 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE U Channel – 3mm x 7mm for 1mm Edges – 25m Coil