
Rubber & FoamSKU IP-TPEU-8.5X12X1-STD
TPE U Channel – 8.5mm x 12mm for 1mm to 3mm Panels – 100m Coil
A push-on TPE U channel, 8.5mm wide and 12mm high, for sheet and panel edges from 1mm to 3mm thick. Two pairs of soft, barbed inner fins grip the sheet, so it needs no glue. The thick, rounded 3mm base takes knocks and covers sharp metal, glass and plastic edges. It comes as one continuous 100m coil in black, which works out at about £8.51 per metre.
At a glance
- Fits 1mm to 3mm edges. The 0.6mm entry gap opens up as the fins flex, so one profile covers thin sheet through to 3mm plate.
- Two hardnesses in one extrusion. A firm 90 Shore A body holds its shape, and softer 60 Shore A fins grip the panel.
- Tested grip. The datasheet gives a pull-off force of 9 N on 1mm, 33 N on 2mm and 65 N on 3mm sheet at 20°C.
- Heavy-duty base. The 3mm solid round base and 2.2mm side walls spread an impact away from the edge.
- Fit it by hand, and refit it. No adhesive is needed, so it can be removed and reused.
- Works indoors and out from -25°C to +70°C. TPE resists weather, UV and many chemicals, and it is fully recyclable.
Technical drawing

End view with nominal dimensions in mm. The base is drawn at the bottom; when fitted, the base sits on the edge and the fins grip either side of the sheet.
Specifications
| Property | Value | Source / test method |
|---|---|---|
| Overall width (widest point) | 8.5 mm | Manufacturer's drawing, nominal |
| Overall height | 12 mm | Manufacturer's drawing, nominal |
| Solid base thickness | 3 mm (thickest point) | Manufacturer's drawing and data table |
| Gripping arm length | 9 mm | Manufacturer's product data |
| Side wall thickness | 2.2 mm | Manufacturer's drawing, nominal |
| Entry gap between fins (unloaded) | 0.6 mm | Manufacturer's drawing, nominal |
| Panel / edge thickness it fits | 1 mm to 3 mm | Manufacturer's clamping range |
| Grip (pull-off) force on 1 mm sheet | 9 N | Manufacturer's datasheet, at 20°C * |
| Grip (pull-off) force on 2 mm sheet | 33 N | Manufacturer's datasheet, at 20°C * |
| Grip (pull-off) force on 3 mm sheet | 65 N | Manufacturer's datasheet, at 20°C * |
| Material | Thermoplastic elastomer (TPE), two hardnesses co-extruded | Manufacturer's datasheet |
| Hardness, body / clamp | 90 Shore A | Shore A durometer, manufacturer's datasheet |
| Hardness, gripping fins / lips | 60 Shore A | Shore A durometer, manufacturer's datasheet |
| Weight | 72 g per metre (about 7.2 kg per 100m coil) | Manufacturer's datasheet |
| Operating temperature | -25°C to +70°C | Manufacturer's datasheet |
| Dimensional tolerance | ISO 3302-1 class E2 (cross-section), L2 (length) | ISO 3302-1, quality level 2 |
| Colour | Black | - |
| Supplied as | One continuous 100m coil | - |
| Density, tensile strength, elongation, tear, compression set | Not published for this profile | Ask us if you need test data for a specification |
* The datasheet gives these forces for a 10cm test piece. Before fitting, clean the edge with a degreaser and remove burrs for the best grip.
Materials and compliance
This profile is made from thermoplastic elastomer (TPE). TPE is a rubber-like plastic that can be melted and re-processed, so the channel is 100% recyclable. The manufacturer publishes no food-contact, WRAS, fire-rating or other approvals for this profile, so we do not claim any. If your project needs a certificate or a declaration, contact us before ordering.
Where it is used
- Safety edging on sheet metal fabrications, guards, enclosures and cabinet cut-outs
- Finishing the edges of glazing, polycarbonate and acrylic panels
- Running boards, steps and stair edges
- Furniture, shopfitting and display panels
- Vending machines and kiosk panels
- Covering sharp edges in workshops, warehouses and vehicles
Which size do I need?
| Edge thickness | Choose |
|---|---|
| 0.5mm to 2.5mm, where a lower profile is needed | TPE U channel 8.5mm x 9.5mm |
| 1mm to 3mm | This TPE U channel 8.5mm x 12mm |
| 2mm only, with a smaller coil | TPE U channel 8mm x 13mm (50m) |
| 4mm | TPE U channel 8.5mm x 25mm |
How much do I need?
Add up the length of every edge you want to cover. A 1.2m x 0.8m panel has 4m of edge, so one 100m coil does 25 panels that size. Allow a few extra centimetres per run for trimming.
Fitting
- Wipe the edge with a degreaser and file off any burrs.
- Start at one end and push the channel on by hand until the edge reaches the base.
- Work along the edge, tapping tight spots home with a rubber mallet. Do not stretch the profile.
- On tight corners, cut a small V-notch out of the arms so the channel turns neatly.
- Cut the end square with a sharp knife or snips, leaving it a millimetre or two long so it butts up tightly.
Frequently asked questions
What thickness of panel does it fit?
Edges from 1mm to 3mm thick. The fins grip harder on thicker sheet: 9 N on 1mm, 33 N on 2mm and 65 N on 3mm in the manufacturer's tests. For sheet under 1mm or over 3mm, choose a different size from the table above.
Do I need glue or adhesive?
No. The barbed fins hold the channel on mechanically. Leaving out adhesive also means you can take it off and refit it later. For the strongest hold, degrease the edge first.
How do I cut and join it?
Cut it with a sharp knife, snips or a fine-tooth saw. For a neat joint, cut both ends square and butt them together. If the join must not move, add a drop of cyanoacrylate (superglue) suited to TPE.
Will it go round curves and corners?
Yes. It follows gentle curves on its own. For a tight bend or a 90° corner, notch the arms on the inside of the bend so the base can turn without kinking.
Can it be used outdoors or in the cold?
Yes. It is rated from -25°C to +70°C, and TPE resists UV, weathering and many chemicals. Do not use it on edges that run hotter than 70°C.
What is the difference between the two hardnesses?
The body is a firm 90 Shore A, so it keeps its shape and protects the edge. The fins are a softer 60 Shore A, so they bend round the sheet and hold it. Both are co-extruded as one piece.
What is it used for?
It covers sharp edges on sheet metal, glazing, guards, furniture, vending machines, running boards and stairs. It protects people from cuts and protects the edge from knocks.
Is it sold by the metre?
No. The price is for one continuous 100m coil, which works out at about £8.51 per metre. The coil is in stock and dispatched from the UK.
Not sure which size you need? Call +44 1282 277786 or email sales@industrial-polymers.co.uk with your sheet thickness.
Product details
| SKU | IP-TPEU-8.5X12X1-STD |
|---|---|
| Weight | 15.87 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE U Channel – 8.5mm x 12mm for 1mm to 3mm Panels – 100m Coil