
Rubber & FoamSKU IP-TPEU-8.5X9.5-BLK
TPE U Channel Edge Trim – 8.5mm x 9.5mm for 0.5mm to 2.5mm Panels – 100m Coil
A compact, self-gripping TPE U channel that pushes onto any edge from 0.5mm to 2.5mm thick. Two pairs of internal fins hold it on without glue, and the solid 2.5mm crown and rounded horseshoe shape take the knocks for the edge underneath. Only 8.5mm wide by 9.5mm high, so it stays neat on display panels and tight spaces. Supplied as one continuous 100m coil in black or white (about £6.13 per metre inc VAT), held in stock in the UK.
At a glance
- Size: 8.5mm wide x 9.5mm high, rounded horseshoe profile
- Fits: edges 0.5mm to 2.5mm thick (one size covers thin sheet to 2.5mm panels)
- Grip: 7mm-deep cavity with two pairs of fins; tested pull-off force up to 31 N per 100mm
- Material: thermoplastic elastomer (TPE), 100% recyclable
- Colours: black or white, same price
- Push-on: no adhesive needed; can be removed and re-fitted
- Bends round curves down to a 100mm radius
Technical drawing

Specifications
| Property | Value | Source / test method |
|---|---|---|
| Profile | Rounded U (horseshoe) with 2 pairs of internal gripping fins | Manufacturer's drawing |
| Overall width (max.) | 8.5 mm | Manufacturer's drawing |
| Overall height | 9.5 mm | Manufacturer's drawing |
| Solid crown (top wall) | 2.5 mm (thickest point) | Manufacturer's drawing and technical data |
| Cavity depth (grip on the edge) | 7.0 mm | Manufacturer's drawing |
| Mouth opening | ≈ 1.7 mm | Scaled from the manufacturer's drawing, not a stated dimension |
| Edge / panel thickness it fits (clamping range) | 0.5 mm to 2.5 mm | Manufacturer's product data and datasheet |
| Pull-off force, 0.5 mm edge | 9 N | Manufacturer's datasheet: 100 mm sample at 20 °C |
| Pull-off force, 1.5 mm edge | 26 N | Manufacturer's datasheet: 100 mm sample at 20 °C |
| Pull-off force, 2.5 mm edge | 31 N | Manufacturer's datasheet: 100 mm sample at 20 °C |
| Minimum bend radius | 100 mm (bending diagram also shows 150 mm and 300 mm bends) | Manufacturer's datasheet bending diagram |
| Material | Thermoplastic elastomer (TPE), single material | Manufacturer's datasheet |
| Hardness | 60 Shore A (datasheet); the product page lists 90 Shore A | Shore A durometer. The two manufacturer figures disagree; ask us if hardness is critical |
| Colour | Black or white | Manufacturer's datasheet |
| Use temperature | −25 °C to +70 °C | Manufacturer's datasheet and product data |
| Weight | 47 g per metre (≈ 4.7 kg per 100 m coil) | Manufacturer's datasheet |
| Dimensional tolerance | ISO 3302-1 class E2 (cross-section) / L2 (length) | ISO 3302-1 |
| Length | 100 m continuous coil | — |
| Density, tensile strength, elongation, tear, compression set | Not published for this profile | Ask us if you need a material certificate |
Materials and compliance
This profile is made from a single thermoplastic elastomer (TPE), in black or white. The manufacturer describes it as having excellent resistance to flex fatigue and to chemicals, good tear and abrasion resistance, as easy to cut, and as 100% recyclable.
The manufacturer does not state any food-contact (FDA, EC 1935/2004), WRAS, REACH or RoHS approval for this product, so we make no such claim. If your application needs a declaration, contact us before ordering.
How it fits

- Deburr the edge and wipe off oil or grease with a degreaser; both improve the grip.
- Start at one end and press the channel onto the edge with your thumb or a rubber mallet, working along. Don't stretch it as you go, or it will shrink back and leave gaps.
- Push it fully home so the edge sits at the top of the 7mm cavity.
- Cut square with a sharp knife or shears. Follow curves down to a 100mm radius; on tighter outside corners, cut a V-notch out of the base or mitre at 45°.
Typical uses
- Safety edging on sheet metal guards, enclosures, cabinets and fabrications
- Finishing the edges of thin glazing, mirrors and acrylic or polycarbonate panels
- Vending machines, kiosks and display units (white suits light-coloured panels)
- Furniture and shelf edges
- Running boards, steps and stair edges
- Protecting sheet edges in storage and transport
How much do I need?
Add up the edge length and allow about 5% for cutting. Example: 60 cabinet doors with a 1.4m perimeter = 84m, or about 88m with the allowance. One 100m coil covers it.
Other sizes for thin edges
| Size | Edge it fits | Choose it for |
|---|---|---|
| 5 x 7mm | 1mm | Smallest, neatest trim |
| 4.5 x 8mm | 1.5mm | Slim trim on 1.5mm sheet |
| 6 x 12.5mm | 0.5 – 1.5mm | Deeper grip on thin sheet |
| 8.5 x 9.5mm (this item) | 0.5 – 2.5mm | Widest range, compact cushioned edge |
| 9 x 13mm | 1 – 2.5mm | Similar range, deeper grip |
| 8.5 x 12mm | 1 – 3mm | Edges up to 3mm |
| 10 x 21mm | 2.5mm | Very deep grip on 2.5mm sheet |
Frequently asked questions
What panel thickness does it fit?
Any edge from 0.5mm to 2.5mm thick. The fins flex to suit, and grip is strongest on thicker edges: the manufacturer measured 9 N on 0.5mm, 26 N on 1.5mm and 31 N on 2.5mm per 100mm length.
Do I need glue?
Not usually. The fins hold it in place and let you remove and re-fit it. On very thin (0.5mm) edges with heavy vibration, a thin bead of contact adhesive in the cavity adds security.
How do I measure what I need?
Measure the edge thickness with calipers (it must be 0.5 – 2.5mm), then the total edge length plus about 5% for cutting. The trim adds 8.5mm to the edge width, covers 7mm of each face and sits 2.5mm proud of the edge.
How do I cut and join it?
Cut with a sharp knife or shears. It follows curves down to a 100mm radius; for sharp corners, mitre at 45° or notch the base. Butt joints can be closed with a drop of cyanoacrylate (superglue) suitable for rubber.
What temperatures can it take?
−25 °C to +70 °C, according to the manufacturer. Above 70 °C, ask us about a silicone or EPDM channel.
Is it suitable outdoors?
TPE copes well with weather, flexing and many chemicals. For long-term exposure in strong sun, ask us and we'll suggest an EPDM option if one suits better.
How hard is it?
The manufacturer's datasheet says 60 Shore A; their product page says 90 Shore A. In practice it is a firm, springy profile that keeps its shape. If you need a certified hardness, contact us before ordering.
Is it food-safe or certified?
No food-contact or other approvals are stated for this profile, so don't use it where food-contact certification is required.
Can I get a shorter length?
This listing is a 100m coil in black or white. Contact us for cut lengths.
Need help choosing? Call +44 1282 277786 or email sales@industrial-polymers.co.uk.
Product details
| SKU | IP-TPEU-8.5X9.5-BLK |
|---|---|
| Weight | 10.36 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE U Channel Edge Trim – 8.5mm x 9.5mm for 0.5mm to 2.5mm Panels – 100m Coil