
Rubber & FoamSKU IP-WGS-33X23-4
EPDM Weatherstrip Glazing Seal – 33mm x 23mm for 6mm Glass & 6mm Panel – Cut to Length
Price shown updates with the option you pick.
This EPDM weatherstrip glazing seal 33mm x 23mm holds a pane of glass, acrylic or polycarbonate up to 6mm thick into a 6mm panel cut-out and makes the joint air and watertight. It is sold cut to the length you choose, from 4m up to a full 30m coil.
At a glance
- H-section rubber glazing gasket: 33mm x 23mm overall
- One slot takes glass or plastic glazing up to 6mm; the other grips a 6mm panel
- Solid EPDM, 65–75 Shore A, -40°C to +90°C
- Strong UV, ozone and weather resistance for outdoor glazing
- Locked tight with a filler strip pressed into the top groove
- Bends to a minimum 102mm radius for rounded window corners
Typical uses
- Glazing windows into steel or aluminium panels
- Boat and marine window rubber
- Cab windows on plant, agricultural and commercial vehicles
- Viewing windows in kiosks, enclosures and machine housings
Which one do I need?
| Window size (W x H) | Perimeter | Length to order |
|---|---|---|
| 600mm x 400mm | 2.0m | 4m (minimum length) |
| 1000mm x 500mm | 3.0m | 4m |
| 1200mm x 900mm | 4.2m | 5m |
| Four 1000mm x 800mm windows | 14.4m | 15m |
Technical drawing
Specification
| Profile | H-section weatherstrip glazing seal |
| Overall size | 33mm x 23mm |
| Glass / glazing thickness | Up to 6mm |
| Panel thickness | 6mm |
| Material | Solid EPDM |
| Colour | Black |
| Hardness | 65–75 Shore A |
| Tensile strength | 10 MPa |
| Elongation at break | 500% |
| Compression set (70°C, 22h) | 21% |
| Temperature range | -40°C to +90°C |
| Minimum bend radius | 102mm |
| Weight | 0.49kg per metre |
| Unit of sale | One continuous length, 4m to 30m |
How much do I need?
Measure the perimeter of each window opening – add the width and height and double it – then round up to the next whole metre to allow for trimming and the slight compression at the joint. A 1000mm x 500mm window needs (1000 + 500) x 2 = 3m, so order the 4m length. For several windows, add the perimeters together and choose one longer length so every window can be cut from it.
Fitting tips
- Clean the panel cut-out and glass edges so no grit sits in the slots.
- Fit the seal round the panel first, starting the joint at the bottom centre, then push the glazing into the outer slot.
- Press in a filler strip to lock the seal – a filler insertion tool makes this much easier.
- Keep corners to a radius of 102mm or more so the seal does not kink.
Complete your project
Questions
Do I need a filler strip with this glazing seal?
Yes. The filler strip locks the rubber onto the glass and panel and makes the seal watertight; it is sold separately.
Will it take polycarbonate or acrylic?
Yes – any glazing sheet up to 6mm thick, including glass, acrylic and polycarbonate.
Can it be used outdoors and on boats?
Yes. Solid EPDM resists UV, ozone and weather and stays flexible from -40°C to +90°C.
How tight a corner will it go round?
The minimum bend radius is 102mm; tighter corners need mitred joints.
Can I order more than 30m?
30m is a full coil, the longest single length; for longer runs order more than one length and join them at a corner.
Need help measuring up? Contact our team.
Product details
| SKU | IP-WGS-33X23-4 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:EPDM Weatherstrip Glazing Seal – 33mm x 23mm for 6mm Glass & 6mm Panel – Cut to Length