
Rubber & FoamSKU IP-BFES-32X16
Neoprene B Fender End Stop – 32mm x 16mm – Pre-Punched – Each
This B fender end stop 32mm x 16mm is a moulded black neoprene cap that finishes the cut end of a 32mm x 16mm B fender strip with a smooth rounded nose. It protects the exposed end from knocks and stops it snagging or peeling. Sold individually and supplied pre-punched for screw or bolt fixing.
At a glance
- Matches 32mm x 16mm B fender profiles
- Overall depth 64mm with a rounded, snag-free nose
- Moulded neoprene rubber, black, 70 Shore A
- Pre-punched fixing hole, ready to fit
- Suitable for indoor, outdoor and marine use
- Sold each: order one for every exposed strip end
Typical uses
- Finishing B fender runs on pontoons, jetties and small craft
- Capping rubber bumper strips on vans and commercial vehicles
- Ending wall guard and rubbing strip runs in factories and loading bays
- Neat ends on impact strips in shopfitting and retail fit-outs
Which one do I need?
| B fender end stop | Fits strip | Best for |
|---|---|---|
| 32mm x 16mm (this one) | 32mm x 16mm B fender | Light rubbing strips on vehicles, walls and small boats |
| 60mm x 32mm | 60mm x 32mm B fender | Heavier fendering on pontoons, docks and trailers |
Technical drawing
Specification
| Material | Neoprene rubber |
| Fits profile | 32mm x 16mm B fender |
| Overall depth | 64mm |
| Hardness | 70 Shore A |
| Fixing | Pre-punched hole |
| Colour | Black |
| Unit of sale | Each |
Installation and care
Butt the end stop tight against the squarely cut end of the fender strip and fix it through the pre-punched hole into the same surface. Wipe clean with water and mild detergent; neoprene needs no other care.
Fitting tips
- Cut the fender strip square with a sharp knife so the end stop sits flush.
- Use stainless steel screws or bolts outdoors and on boats.
- Tighten until the head just seats; overtightening distorts the rubber.
- Fit one end stop at each exposed end of every run.
Complete your project
- Neoprene B Fender End Stop – 60mm x 32mm – Pre-Punched – Each
- Neoprene Rubber B Fender – 38mm x 13mm – 36.57m Coil
- Neoprene B Fender – 51mm x 25mm – 18.28m Coil
Questions
Will this B fender end stop fit other fender sizes?
It is moulded to match a 32mm x 16mm B fender. For larger strips choose the 60mm x 32mm end stop.
Are fixings included?
No. It comes pre-punched; use screws or bolts that suit your mounting surface.
Can it be used outdoors or on boats?
Yes. Neoprene copes well with weather, water and general marine use.
How many do I need?
One for every exposed end. A single straight run with two open ends needs two.
Need help matching an end stop to your fender? Contact our team.
Product details
| SKU | IP-BFES-32X16 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Neoprene B Fender End Stop – 32mm x 16mm – Pre-Punched – Each