
Rubber & FoamSKU IP-IPRBF-32X16-STD
EPDM Rubber B Fender – 32mm x 16mm – 30m Coil
This EPDM rubber B fender 32mm x 16mm is a compact, flat-backed impact strip for protecting trolleys, vehicle bodies, walls and fixtures from knocks. Supplied as one continuous 30m coil, it is screwed or bolted on through its central fixing slot and gives discreet bump protection where a larger fender would be too bulky.
At a glance
- 32mm wide x 16mm high B-section rubber bumper strip
- Flat back with twin rounded faces either side of a central fixing slot
- Firm but forgiving 70° Shore A EPDM absorbs repeated light impacts
- Resists UV, ozone and weather for indoor and outdoor use
- Black, supplied as a continuous 30m coil
Typical uses
- Trolley, cage and roll-container edge protection
- Rubbing strip on trailers, ambulance and truck bodywork
- Wall, column and fixture protection in warehouses and loading areas
- Shopfitting, factory walls and small marine rub rails
Which one do I need?
| Fender | Best for |
| 32mm x 16mm EPDM (this fender) | Light knocks on trolleys and vehicle panels where space is tight |
| 38mm x 13mm neoprene | Slightly wider, lower profile rubbing strip |
| 45mm x 25mm TPE | Deeper cushioning for heavier trolley and wall impacts |
| 60mm x 14mm neoprene | Wide, flat face covering a larger contact area |
Technical drawing
Specification
| Profile size | 32mm wide x 16mm high |
| Material | EPDM rubber |
| Hardness | 70° Shore A |
| Tensile strength | 7.2 MPa |
| Elongation at break | 305% |
| Tear strength | 55 N/mm |
| Compression set | 23% (24h at 100°C, 25%) |
| Ozone resistance | No cracking (72h at 40°C, 50pphm) |
| Colour | Black |
| Unit of sale | One 30m coil |
How much do I need?
Add up the edges you want to protect. A roll cage 1.2m long and 0.8m wide needs 4m to go all the way round its base, so one 30m coil covers seven cages with a little left over for trimming. For a run of wall or a vehicle side, measure the length and allow 2-3% extra for cutting.
Fitting tips
- Clean and degrease the mounting face, then hold the fender flat with its back against the surface.
- Fix through the central slot with pan-head screws or bolts suited to the substrate, every 300-400mm.
- Fix within 50mm of each cut end so the ends cannot lift.
- Let the coil relax at room temperature before fitting so it lies straight.
Complete your project
- Neoprene Rubber B Fender – 38mm x 13mm – 36.57m Coil
- TPE B Fender – Black – 45mm x 25mm – 25m Coil
- Hollow TPE D Fender – 40mm x 20mm – 25m Coil
Questions
Can this rubber B fender be used outdoors?
Yes. EPDM resists UV, ozone and weathering, so it suits trailers, vehicles and outside walls.
How is it fixed?
It is mechanically fixed with screws or bolts through the central slot into the surface behind.
Is it strong enough for forklift impacts?
No. This compact 32mm x 16mm profile is for light knocks from trolleys, doors and people; choose a larger D or delta fender for vehicle or dock impacts.
Can I buy less than 30 metres?
It is supplied as a complete 30m coil, which you cut to length on site.
Need help choosing an impact strip? Contact our team for advice.
Product details
| SKU | IP-IPRBF-32X16-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:EPDM Rubber B Fender – 32mm x 16mm – 30m Coil