
Rubber & FoamSKU IP-EPDMU-11.5X10-11
EPDM Square U Channel – 11.5mm x 10mm – Cut Length
Price shown updates with the option you pick.
This EPDM square U channel 11.5mm x 10mm is a solid black rubber edge trim that pushes over 8mm panels to cover sharp edges and absorb knocks. It is sold as one continuous cut length, from 11m up to a full 30m coil.
At a glance
- Square U profile, 11.5mm wide x 10mm high
- 8mm slot, about 8.2mm deep, for 8mm sheet, board and glass edges
- 1.75mm solid walls: a compact edge protector that still takes a knock
- EPDM rubber, 65-75 Shore A: weather, ozone and UV resistant
- Push-on friction fit; bond with sealant for a permanent seal
- One continuous length per order, 11m to 30m
Typical uses
- Rubber edge protector for 8mm guard panels, enclosures and sheet metal
- Edge trim for 8mm glass, polycarbonate and acrylic screens
- Edge finish for doors, cabinet fronts and display units
- Knock protection on vending machines and equipment housings
- Safety edging on stair edges and running boards
Which one do I need?
Pick the channel by the thickness of the edge it has to grip:
| Profile | Suits |
|---|---|
| EPDM square U 9mm x 8mm | 6mm panels, lowest profile |
| EPDM square U 13.2mm x 17mm | 7mm panels, thick 3.1mm walls |
| EPDM square U 11.5mm x 10mm (this item) | 8mm panels, compact profile |
| EPDM square U 14mm x 16mm | 10mm panels and heavy doors |
Technical drawing
Specification
| Material | Solid EPDM rubber |
| Colour | Black |
| Overall size | 11.5mm wide x 10mm high |
| Slot | 8mm wide, about 8.2mm deep |
| To fit panel | 8mm |
| Wall thickness | 1.75mm |
| Hardness | 65-75 Shore A |
| Tensile strength | 10 MPa |
| Elongation at break | 500% |
| Tear strength | 50 kN/m |
| Weight | 0.06kg per metre |
| Unit of sale | One continuous cut length, 11m to 30m |
How much do I need?
Add up every edge you want to cover and allow about 5% for trimming. Example: four 8mm guard panels 1m wide x 1.5m high, edged all round, need 4 x 5m = 20m, plus 5% = 21m, so choose 21m. Each option is one unbroken piece; the full 30m coil is priced as a complete coil, so it is the better buy once you need more than about 26m.
Fitting tips
- Check the edge is 8mm thick: the slot grips firmly on that size and will be loose on 6mm sheet.
- Clean off dust and oil, start on a straight run and press the channel on with your thumb or a rubber mallet.
- On outside corners, cut a small V-notch from the inside of the base so the channel bends without bunching.
- For a permanent or watertight fit, run a bead of polyurethane or silicone sealant into the slot first.
Complete your project
- EPDM Square U Channel – 9mm x 8mm for 6mm Panels
- Black EPDM Square U Channel – 14mm x 16mm
- EPDM Square U Channel – 8.75mm x 14mm
Questions
Will this 8mm U channel fit a 6mm panel?
It will be loose. Choose the 9mm x 8mm channel for 6mm edges, or bond a thin rubber strip inside this one to take up the gap.
Can this rubber edge trim be used outdoors?
Yes. EPDM resists weather, ozone, UV and temperature swings, so it suits outdoor doors, hatches and guards.
Is it hollow or solid?
Solid EPDM throughout, with 1.75mm walls and a square base.
Why is the 30m length cheaper than 29m?
30m is a full coil and needs no cutting, so it is priced as a complete coil.
Do I need adhesive?
Not for most edges: it is a friction fit. Use sealant in the slot where it must resist vibration or keep water out.
Need help choosing? Contact our technical team with your panel thickness or application and we will point you to the right profile.
Product details
| SKU | IP-EPDMU-11.5X10-11 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:EPDM Square U Channel – 11.5mm x 10mm – Cut Length