
Rubber & FoamSKU IP-ICPR-270X68-STD
Rubber Cable Protector 270mm x 68mm – 53mm Channel – 1.5m Length
This rubber cable protector 270mm x 68mm is a heavy-duty floor ramp with one large 53mm channel, made to carry thick power cables, welding leads or hoses across yards and industrial floors where vehicles cross. It is sold as one 1.5m length.
At a glance
- 270mm wide x 68mm high ramp profile
- One 53mm diameter channel for large cables or hoses
- Split base: push the cable in from underneath
- Natural rubber / SBR, 75 ±5 Shore A
- Ribbed underside grips the floor
- Halogen-free, UV stable, tested to BS 476 Part 7 Class 3
Typical uses
- Thick power feeds and generator cables across yards and site roads
- Air, water and fuel hoses crossing warehouse and depot floors
- Welding and machine supply leads in fabrication shops
- Temporary services at events and construction sites
Which one do I need?
Choose by the size of the cable or hose and the traffic over it:
| Profile | Suits |
|---|---|
| Cable protector 127mm x 28mm | One cable up to 23mm |
| Cable protector 180mm x 36mm | One cable up to 30mm |
| Cable protector 270mm x 68mm (this item) | One large cable or hose up to 53mm |
| Cable protector 330mm x 85mm | The largest cables and hoses |
Technical drawing
Specification
| Material | Natural rubber / SBR blend |
| Colour | Black |
| Width | 270mm |
| Height | 68mm |
| Channel | 53mm diameter |
| Cable entry | Split membrane in the base |
| Hardness | 75 ±5 Shore A |
| Fire | Tested to BS 476 Part 7 Class 3 |
| Halogens | Halogen-free |
| Unit of sale | One 1.5m length |
How much do I need?
Measure the width the cable has to cross and divide by 1.5m, rounding up. Example: a 4m wide site road needs three lengths (4.5m) butted end to end. A single doorway or 1.2m walkway is covered by one length.
Fitting tips
- Check the cable or hose, including any couplings you need to pass, fits the 53mm channel.
- Lay the protector on a clean, level surface so the ribbed base sits flat.
- Open the split base and press the cable up into the channel; there is no need to thread it through from the end.
- On wider crossings, butt lengths tightly together so there is no gap or step.
Complete your project
- Industrial Rubber Cable Protector – 330mm x 85mm – 1.5m Length
- Rubber Cable Protector – 180mm x 36mm, 30mm Hole – 4.5m Length
- Hi-Vis Cable Protector 156mm x 30mm – 2 x 23mm Channels – 4.5m Length
Questions
What size cable does it take?
One cable or hose up to 53mm diameter.
Can vehicles drive over it?
Yes, it is a toughened industrial profile designed to protect cables in areas with vehicle traffic.
How does the cable go in?
Open the split membrane in the base and push the cable up into the channel.
Can it be used outdoors?
Yes, the rubber is UV stable for long outdoor use and is halogen-free with low smoke emission.
Need help choosing? Contact our technical team with your panel thickness or application and we will point you to the right profile.
Product details
| SKU | IP-ICPR-270X68-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Rubber Cable Protector 270mm x 68mm – 53mm Channel – 1.5m Length