
Rubber & FoamSKU IP-RET-8X16-10M
Self-Grip Rubber Edge Trim – 8mm x 16mm – Fits 1mm to 2mm Panels – 10m to 100m
Price shown updates with the option you pick.
A heavy-duty black rubber edge trim with a steel wire carrier that pushes onto 1 mm to 2 mm sheet edges and holds by grip alone, with no glue. At 8 mm wide and 16 mm tall it is a deeper, chunkier trim than our 7.4 × 9.7 mm profile, so it covers more of the panel face and gives a thicker cushion over sharp edges. A U-shaped steel wire runs inside the rubber for the full length and keeps the jaws clamped, while two angled fins inside the channel bite on both faces of the panel. Choose any continuous length from 10 m to 49 m, a full 50 m coil or 100 m (two coils). It is in stock in the UK for same-day dispatch.
At a glance
- Fits: sheet metal, glass, plastic, fibreglass and board edges 1 mm to 2 mm thick
- Size: 8 mm wide × 16 mm high; 6.7 mm across the crown; 4 mm mouth between the feet; 1.6 mm between the fin tips
- Construction: solid black rubber (70° to 74° Shore A) moulded over a U-shaped steel wire carrier
- Grip: twin internal fins and the wire clamp hold it on with no adhesive, so it can be removed and refitted
- Working temperature: −40 °C to +120 °C
- Weight: 0.115 kg per metre
- Price: £7.74 per metre inc VAT for 10 m to 49 m; 50 m coil £258.00 (£5.16/m); 100 m £492.00 (£4.92/m)
Technical drawing

All dimensions are in mm and nominal. The drawing is not to scale. The carrier and fin shapes are shown as typical.
Specifications
| Property | Value | Test method / basis |
|---|---|---|
| Profile | Self-gripping U edge trim with steel wire carrier, twin internal gripping fins and solid rubber feet | Manufacturer drawing |
| Overall width (across the feet) | 8 mm | Manufacturer drawing and data sheet |
| Overall height | 16 mm | Manufacturer drawing and data sheet |
| Width across the crown | 6.7 mm | Manufacturer drawing |
| Height from crown to top of the feet | 13.3 mm | Manufacturer drawing |
| Foot width (each side) | 2 mm | Manufacturer drawing; product page "thickness 2 mm" |
| Mouth opening between the feet (unflexed) | 4 mm | Manufacturer drawing |
| Gap between the fin tips (unflexed) | 1.6 mm | Manufacturer drawing |
| Panel thickness it fits | 1 mm to 2 mm | Manufacturer product data and data sheet |
| Material | Solid black rubber: stated as EPDM on the manufacturer's product page and as Neoprene (CR) on its data sheet (see below) | Manufacturer |
| Carrier | Steel wire, U-shaped, full length | Manufacturer |
| Colour | Black | Manufacturer |
| Hardness | 70° Shore A (product page); 73° to 74° Shore A (data sheet) | ISO 7619-1 |
| Tensile strength | 9.51 MPa | ISO 37 |
| Elongation at break | 235 % | ISO 37 |
| Tear resistance | 18.7 N/mm | ISO 34-1 |
| Density | 1.4 g/cm³ | ISO 2781 |
| Ozone resistance (72 h at 40 °C, 50 pphm) | No cracking | ISO 1431-1, method A |
| UV resistance | No migration | ASTM D1148 |
| Brittleness (24 h at −40 °C) | No cracking | ISO 812 |
| Cure (rheometer, 3 min at 185 °C) | MH 4.62 dN·m; ML 1.26 dN·m | ISO 3417 |
| Heat ageing: hardness change | +5° Shore A | ISO 188 / ISO 7619-1 (ageing conditions not stated) |
| Heat ageing: tensile strength change | −2.5 % | ISO 188 / ISO 37 |
| Heat ageing: elongation change | −20.57 % | ISO 188 / ISO 37 |
| Minimum working temperature | −40 °C | Manufacturer data |
| Maximum working temperature | +120 °C | Manufacturer data |
| Weight | 0.115 kg per metre | Manufacturer data |
| Compression set | Not stated for this profile | Ask us if you need it |
| Dimensional tolerance | Not stated; dimensions are nominal | Ask us if you need it |
| Supplied as | One continuous length, 10 m to 49 m; a full 50 m coil; or 100 m as two 50 m coils | — |
| Price | £7.74/m inc VAT (10–49 m); £5.16/m (50 m coil); £4.92/m (100 m) | — |
Materials and compliance
The trim is solid black rubber moulded over a steel wire carrier. The manufacturer's product page calls the rubber EPDM, while its data sheet for the same part calls it Neoprene (polychloroprene, CR). The test results above come from that data sheet. Both rubbers handle weather, ozone and UV well, and the tests show no cracking after ozone exposure or at −40 °C, so the trim suits outdoor edges. The difference matters mainly if the trim will be soaked in oil or fuel: neoprene copes moderately, EPDM poorly. If that applies to you, contact us and we will confirm the compound before you order. The manufacturer does not state any food-contact (FDA, EC 1935/2004), drinking-water (WRAS), fire-rating, REACH, RoHS or other product approvals for this trim, so we do not claim any.
How it fits

- Check the edge. The panel should be 1 mm to 2 mm thick. Deburr the edge and make sure it is clean and dry.
- Push on. Start at one end and press the trim onto the edge by hand, working along the run.
- Seat it. Tap along the top with a rubber or plastic mallet until the edge sits fully inside the channel. You need no adhesive.
- Cut and finish. Cut through the rubber and wire with side cutters, tin snips or a fine hacksaw. Butt the ends tightly together.
Typical uses
- Finishing cut edges on sheet steel and aluminium panels, enclosures and computer or electrical cabinets
- Safety edging on machine guards, brackets, access hatches and work-cell panels
- Garage doors, sheds, playground equipment and other outdoor sheet edges
- Fibreglass and aluminium panels on boats and marine equipment
- Vehicle interior side panels and side window surrounds
- Protecting sheet and glass edges in storage and transport
FAQ
What thickness of panel does it fit?
It is made for edges 1 mm to 2 mm thick, which covers most 1.2 mm and 1.5 mm sheet steel, 2 mm aluminium and thin glass or acrylic. Below 1 mm the fins grip less firmly. If you want a slimmer finish on the same thickness, see our 7.4 × 9.7 mm EPDM trim.
Why choose 8 × 16 mm over a smaller trim?
The deeper 16 mm profile covers more of each face of the panel, and the thicker crown and 2 mm feet give more cushioning over a sharp edge. It suits guards, doors and anything people or materials knock against.
How much do I need, and which length is best value?
Measure the total run in metres and add about 5 % for cuts and corners. Lengths from 10 m to 49 m are £7.74 per metre. A full 50 m coil is £258.00, so if you need 34 m or more, the coil costs the same or less. 100 m (two coils) works out at £4.92 per metre.
Do I need glue?
No. The steel wire keeps the jaws clamped and the two fins hold the trim on. Because there is no adhesive, you can remove it and fit it again.
Will it go round corners and curves?
Yes. The wire carrier bends, so the trim follows curves and radiused corners. For a sharp 90° external corner, cut a small V-notch in the inside of the trim so it folds neatly without bunching.
How do I cut and join it?
Because of the steel wire, a knife alone will not do. Use side cutters, tin snips or a fine-tooth hacksaw, then trim any loose rubber. Butt the ends tightly for a neat joint; no joining piece is needed.
What temperatures can it take?
The manufacturer rates it for −40 °C to +120 °C, and its tests show no cracking after 24 hours at −40 °C. That covers outdoor UK use all year and warm machinery, but not ovens or exhaust parts.
Is it EPDM or neoprene?
The manufacturer describes it both ways (EPDM on the product page, Neoprene CR on the data sheet). For edging in normal indoor and outdoor use either performs well. If oil or fuel resistance matters, ask us and we will confirm the compound first.
Is it food safe?
No food-contact or drinking-water approvals are stated for this trim, so do not use it where those are required.
Complete your project
- EPDM Self-Grip Edge Trim – 7.4mm x 9.7mm – slimmer trim for 1–2 mm panels
- Fire-Rated EPDM Self-Grip Edge Trim – 7.4mm x 9.7mm – EN 45545-2
- Self-Grip PVC Edge Trim – 6.5mm x 9.5mm – for 1mm to 1.5mm panels
- PVC Self-Grip Edge Trim – 12mm x 15.5mm – for thicker panels
Need help choosing or fitting? Call +44 1282 277786, email sales@industrial-polymers.co.uk or contact our team.
Product details
| SKU | IP-RET-8X16-10M |
|---|---|
| Weight | 2.54 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Self-Grip Rubber Edge Trim – 8mm x 16mm – Fits 1mm to 2mm Panels – 10m to 100m