Rubber & FoamSKU IP-SLP-30X13X2-BLACK-10
Silicone L Profile – 30mm x 13mm, 2mm Wall – 10m or 25m Coil
Price shown updates with the option you pick.
This silicone L profile 30mm x 13mm is a thin-wall unequal angle with 2mm legs, used to cap, protect and seal square edges on panels, enclosures and glazing. It is sold as a 10m or 25m coil in seven colours.
At a glance
- Unequal angle: one leg 30mm, the other 13mm, 2mm wall throughout
- Flexible 60 Shore A silicone rubber angle trim
- Rated from -50°C to +180°C
- Food-contact grade to FDA 21 CFR 177.2600 and EC 1935/2004; WRAS approved
- Resists UV, ozone and weathering outdoors
- Seven colours for colour-coding, hygiene zones or a neat finish
Typical uses
- Edge protector and corner seal on machine guards and enclosures
- Capping sheet-metal and glass panel edges in food and pharma plants
- Cover strip where a wide face leg hides a joint and the short leg wraps the edge
- Cleanroom, laboratory and shopfitting edge finishing
- Light-duty door and hatch corner seals
Which one do I need?
| 30mm silicone L | Choose it when |
|---|---|
| 30mm x 11.5mm | You want an even shorter return leg |
| 30mm x 13mm, 2mm wall (this one) | You need a wide 30mm face with a 13mm return in a flexible 2mm wall |
| 30mm x 15mm | The return leg must reach 15mm |
| 30mm x 19mm, 1.3mm wall | You want a deeper return in a lighter, thinner wall |
Technical drawing
Specification
| Material | Silicone rubber |
| Section | 30mm x 13mm unequal L |
| Wall thickness | 2mm |
| Hardness | 60 Shore A |
| Density | 1.15 g/cm³ |
| Tensile strength | 11 N/mm² |
| Elongation at break | 550% |
| Tear strength | 26 N/mm |
| Temperature range | -50°C to +180°C |
| Approvals | FDA 21 CFR 177.2600, EC 1935/2004, WRAS |
| Colours | Black, blue, green, red, translucent, white, yellow |
| Unit of sale | 10m coil or 25m coil |
How much do I need?
Add up every edge you want to cover and allow about 5% for trimming and mitred corners. Example: edging a 1.5m x 1.5m enclosure (6m perimeter) plus a separate 3m panel edge needs 9m, plus 5% = about 9.5m, so a single 10m coil covers it. For runs over 10m the 25m coil is the better buy.
Fitting tips
- Clean and degrease the edge first so the silicone sits flat.
- Cut with a sharp knife against a straight edge; mitre corners at 45° for a tidy join.
- The thin 2mm wall can sit dry for light duty; for a permanent or watertight fix, bond with silicone adhesive sealant.
- Decide which leg faces the viewer before cutting: the 30mm leg gives the wider cover face.
Complete your project
- Silicone L Profile – 30mm x 15mm
- Silicone L Profile – 32mm x 20mm
- Silicone U Channel – 18mm x 22mm for 12mm Panels
Questions
Which way round do the legs go?
Either way. Most people put the wide 30mm leg on the face that is seen or knocked and the 13mm leg over the top edge.
Is it food safe?
Yes. The silicone meets FDA 21 CFR 177.2600 and EC 1935/2004 for food contact and is WRAS approved.
How flexible is a 2mm wall?
At 60 Shore A with a 2mm wall it bends easily round gentle curves and absorbs knocks while keeping its angle.
Can it be used outdoors?
Yes. Silicone resists UV, ozone and weathering and stays flexible from -50°C to +180°C.
What is the difference between the 10m and 25m coil?
Only the length; the profile, grade and colours are the same.
Need help choosing? Contact our team with your edge thickness and application and we will point you to the right profile.
Product details
| SKU | IP-SLP-30X13X2-BLACK-10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 30mm x 13mm, 2mm Wall – 10m or 25m Coil