Rubber & FoamSKU IP-SIUC-4.6X10X2.5-10-BLACK
Silicone U Channel – 4.6mm x 10mm for 2.5mm Panels – 10m or 30m Coil
Price shown updates with the option you pick.
A push-on silicone U channel sized for 2.5mm sheet: polycarbonate and acrylic guards, aluminium covers, 12-gauge steel and similar mid-weight panels. The channel is 2.6mm wide and a full 9mm deep, and its legs close in slightly towards the mouth, so they spring against both faces of the sheet and hold on most edges without glue. The finished trim is only 4.6mm wide and 10mm tall. It is extruded from platinum-cured silicone with a smooth, glossy, non-yellowing surface, the compound is approved for food-contact use, and it stays flexible from -40°C to +200°C. Choose a 10m or 30m coil in black, translucent or white.
At a glance
- Made for panels and edges 2.5mm thick
- 4.6mm wide x 10mm high, 2.6mm channel, 9mm channel depth, 1mm walls and base
- Platinum-cured silicone, 60 Shore A: soft enough to push on by hand, firm enough to grip
- Service range -40°C to +200°C, from freezers to oven and heater housings
- Compound approved for food-contact applications
- Glossy, non-yellowing surface with excellent weather resistance
- Black, translucent or white, same price in every colour
- 10m coil (about £30.12 per metre) or 30m coil (about £21.50 per metre)
Typical uses
- Capping the edges of 2.5mm polycarbonate or acrylic machine guards and screens on food and packaging lines
- Finishing door edges, cut-outs and covers on 2.5mm steel and aluminium enclosures
- Edging vending machine panels, display panels and glazing contours
- Trimming hoppers, chutes and trays in bakeries, kitchens and food plants
- Heat-resistant edge trim round oven, heater and lamp housings where PVC trim would soften
- Protecting hands, cables and hoses from sharp edges on stairs, running boards and fabricated sheet-metal parts
Technical drawing
![]()
Which size do I need?
Measure the thickness of the edge with callipers, then pick the channel made for that thickness. A channel that is too wide will slide off; one that is too narrow can split.
| Silicone U channel | Fits edge thickness |
|---|---|
| Silicone U Channel 3.2mm x 5mm | 1.0 – 1.2mm |
| Silicone U Channel 3.6mm x 6mm | 1.5 – 1.6mm |
| Silicone U Channel 4.1mm x 8mm | 2mm |
| Silicone U Channel 4.6mm x 10mm (this one) | 2.5mm |
| Silicone U Channel 7.1mm x 13mm | 4mm |
| Silicone U Channel 9.1mm x 14mm | 5mm |
Specification
| Property | Value | Test method / basis |
|---|---|---|
| Profile and dimensions | ||
| Profile | U channel with round base, legs closing in towards the mouth (push-on edge trim) | – |
| Overall width | 4.6 mm | Nominal, from profile drawing |
| Overall height | 10.0 mm | Nominal, from profile drawing |
| Channel width | 2.6 mm | Nominal, manufacturer's specification |
| Channel depth | 9.0 mm | Nominal, from profile drawing |
| Wall thickness | 1.0 mm | Nominal, manufacturer's specification |
| Base thickness | 1.0 mm | Overall height minus channel depth |
| Fits panel / edge | 2.5 mm | Manufacturer's fitting size |
| Section area | approx. 21 mm² | Calculated from nominal profile |
| Weight | approx. 25 g per metre (0.25 kg per 10 m, 0.75 kg per 30 m) | Calculated from section area at typical silicone density |
| Dimensional tolerance | typically ±0.25 mm on channel, ±0.4 mm on overall size | Typical for silicone extrusions to ISO 3302-1 class E2; not tested on this profile |
| Material | ||
| Material | Silicone rubber (VMQ), platinum cured | Manufacturer's specification |
| Hardness | 60 Shore A | Shore A durometer (ISO 48-4) |
| Minimum service temperature | -40 °C | Manufacturer's rating |
| Maximum service temperature | +200 °C | Manufacturer's rating |
| Density | typically 1.15 – 1.20 g/cm³ | Typical for 60 Shore A silicone (ISO 2781); not tested on this profile |
| Tensile strength | typically 7 – 9 MPa | Typical for silicone (ISO 37); not tested on this profile |
| Elongation at break | typically 300 – 450 % | Typical for silicone (ISO 37); not tested on this profile |
| Tear strength | typically 15 – 25 kN/m | Typical for silicone (ISO 34-1); not tested on this profile |
| Compression set | typically 15 – 30 % (22 h at 175 °C) | Typical for silicone (ISO 815-1); not tested on this profile |
| Weathering resistance | Excellent | Manufacturer's rating |
| Oil resistance | Fair (not for continuous oil or fuel immersion) | Manufacturer's rating |
| Surface finish | Smooth, high gloss, non-yellowing | Manufacturer's statement |
| Recyclability | 100% recyclable | Manufacturer's statement |
| Supply | ||
| Colours | Black, translucent, white | – |
| Unit of sale | One continuous 10 m or 30 m coil | – |
| Price per metre | approx. £30.12 (10 m) or £21.50 (30 m) inc VAT | Coil price ÷ coil length |
Need tested values for your own records? Ask us and we will send what is available for the batch you receive.
Materials and compliance
- Platinum-cured silicone: the rubber is vulcanised with a platinum catalyst instead of peroxide. That leaves no peroxide by-products in the part, keeps the translucent and white grades from yellowing, and gives a smooth, glossy skin that is easy to wipe clean.
- Food-contact approved compound: the manufacturer states the compound is approved for food-contact applications, so it is a sensible choice for trims on food processing, bakery, catering and packaging equipment.
- Stable across temperature: silicone keeps its flexibility from -40°C to +200°C, so it neither cracks in a cold store nor softens beside a heater.
The approval relates to the material. Whether a finished assembly complies depends on the application. If you need a declaration of compliance for an audit, contact our team before ordering and we will confirm what paperwork is available for this profile.
How much do I need?
Add together the length of every edge you want to cover and allow about 5% for trimming and joints. Example: a 1.5m x 0.8m polycarbonate guard edged all round needs 4.6m, or about 4.9m with allowance, so a 10m coil covers two guards. If you need more than 20m, one 30m coil costs less than three 10m coils.
Fitting tips
- Deburr the edge, then wipe it clean and dry
- Start at one end and press the channel on with your thumb, working along the edge
- Cut with a sharp knife or scissors slightly over length and push the ends together for a tight butt joint
- For a permanent or sealed fit, or where there is vibration, run a thin bead of silicone or polyurethane sealant into the channel first
Questions
What thickness of panel does it fit?
It is made for edges 2.5mm thick, such as 2.5mm polycarbonate, acrylic or aluminium sheet. For 2mm sheet choose the 4.1mm x 8mm channel; for 4mm sheet the 7.1mm x 13mm.
Does it need glue?
Usually not. The legs close in towards the mouth and the channel is 9mm deep, so it grips a clean 2.5mm edge by friction. Where the part vibrates, is handled often or must be sealed, bed it in silicone or polyurethane sealant.
Is it suitable for food equipment?
Yes. The manufacturer states the compound is approved for food-contact applications, and the glossy surface wipes clean easily.
What temperatures can it handle?
It is rated from -40°C to +200°C, so it suits ovens, heater panels and lamp housings as well as chillers and freezers.
How do I cut and join it?
A sharp knife or scissors gives a clean square cut. Butt the ends tightly together; for a sealed joint, add a dab of silicone sealant. To go round a tight 90° corner, cut a small V notch in the base or mitre two lengths.
Can I make it fit a slightly different edge?
Yes, within reason. For a thinner panel, bond a thin strip inside the channel to take up the gap; to widen the finished edge, bond a strip alongside the channel.
Can I use it near oil?
Occasional splashes are fine, but its oil resistance is only fair. For parts that sit in oil or fuel, a nitrile or fluorosilicone profile is the better choice.
Which colour should I choose?
Translucent is milky and blends into clear plastics, glass and stainless steel. White gives a clean opaque edge for white goods and food areas. Black suits painted machinery and enclosures. All three are the same compound, profile and price.
10m or 30m?
The 10m coil suits single machines and small jobs. The 30m coil costs about 29% less per metre and is the better buy for production runs or several machines. For other lengths or volume pricing, ask our team for a quote.
Need help choosing an edge trim or seal? Contact our team on +44 1282 277786 or sales@industrial-polymers.co.uk.
Product details
| SKU | IP-SIUC-4.6X10X2.5-10-BLACK |
|---|---|
| Weight | 0.66 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone U Channel – 4.6mm x 10mm for 2.5mm Panels – 10m or 30m Coil