
Rubber & FoamSKU IP-TPEUC-6X12-BLACK
TPE Square U Channel – 6mm x 12mm for 2mm Panels – 25m Coil
A heavy-duty, square-section push-on trim for capping the raw edges of 2mm sheet. The profile is 6mm wide and 12mm tall, with a 2mm parallel slot running 10mm deep. Both walls and the base are a full 2mm thick, so the trim takes knocks and pressure without crushing, and the tall sides cover 10mm of each face of the panel. That deep grip holds a clean 2mm edge firmly without adhesive. It is extruded from black 60 Shore A thermoplastic elastomer (TPE), supplied as one continuous 25m coil, and held in stock.

At a glance
- Fits sheet and panel edges 2mm thick
- 6mm wide x 12mm high, 2mm slot 10mm deep
- Uniform 2mm walls and base: rigid, impact-absorbing and hard to crush
- 10mm gripping arms hold a wide strip of each face, so glue is rarely needed
- 60 Shore A TPE: resists UV, weathering, chemicals and repeated flexing
- Cuts cleanly with a knife; fully recyclable thermoplastic
- Black, 25m coil, about £19.17 per metre
Typical uses
- Capping sharp edges on 2mm sheet-metal machine guards, covers and enclosure panels
- Edge finish on glazing, acrylic and polycarbonate panels 2mm thick
- Vending machine, kiosk and cabinet panels
- Furniture, shelving and stair-edge panels made from thin sheet
- Running boards and light vehicle or trailer panels
- Protecting sheet stock edges during handling and transport
Which size do I need?
Measure the edge you want to cover and match it to the slot. For 2mm edges there are two square TPE options:
| U channel | Fits edge thickness | Grip depth |
|---|---|---|
| TPE Square U Channel 6mm x 12mm (this one) | 2mm | 10mm, 2mm walls: heavier duty |
| TPE Square U Channel 5mm x 9.5mm | 2mm | 8mm, 1.5mm walls: slimmer |
| TPE Square U Channel 3mm x 9mm | 1mm | – |
| TPE Square U Channel 9mm x 17mm | 3mm | – |
| TPE Square U Channel 22mm x 12mm | 8mm to 10mm | – |
Specification
| Property | Value | Test method / source |
|---|---|---|
| Profile and dimensions | ||
| Profile | Square-section U channel (push-on edge trim) | – |
| Overall width | 6.0 mm | Nominal, ISO 3302-1 class E2 |
| Overall height | 12.0 mm | Nominal, ISO 3302-1 class E2 |
| Slot width | 2.0 mm, parallel sides | Nominal |
| Slot depth (gripping arm length) | 10.0 mm | Nominal |
| Wall thickness | 2.0 mm each side | Nominal |
| Base thickness under slot | 2.0 mm | Nominal |
| Fits edge / panel (clamping range) | 2 mm | Manufacturer data |
| Dimensional tolerance | Cross-section class E2, length class L2 (quality level 2) | ISO 3302-1 |
| Weight | 56 g per metre, approx. 1.4 kg per 25 m coil | Manufacturer data |
| Material | ||
| Material | Thermoplastic elastomer (TPE) | – |
| Hardness | 60 Shore A | Shore A durometer (ISO 48-4) |
| Working temperature | -25 °C to +70 °C | Manufacturer datasheet (a wider -40 °C to +90 °C is quoted elsewhere; we list the datasheet figure) |
| Environmental resistance | UV, weathering, chemicals, flex fatigue; good tear and abrasion resistance | Manufacturer data |
| Density, tensile strength, elongation, tear, compression set | Not published for this profile; ask us if you need them | – |
| Supply | ||
| Colour | Black | – |
| Unit of sale | One continuous 25 m coil | – |
| Availability | Held in stock | – |
Material and compliance
TPE is a rubber-like material that is processed like a plastic. It gives a consistent, rubbery feel, needs no vulcanising, and can be recycled at end of life.
- Weathering: stable in sunlight and outdoor conditions, and resists ageing
- Chemical resistance: stands up to water, mild cleaning agents and general workshop exposure
- Tolerances: extruded to ISO 3302-1, the standard tolerance scheme for rubber and elastomer extrusions
No food-contact, potable-water (WRAS), REACH/RoHS or fire-rating approval is claimed for this profile. If you need a declaration for your file, contact our team.
How much do I need?
Total the length of every edge you want to cover and add about 5% for trimming. Example: 10 guard panels, each with 2.2m of exposed edge, need 22m, or about 23.1m with allowance, so one 25m coil covers the job.
Fitting tips
- Deburr the edge and wipe it free of oil and grease before fitting
- Start at one end and press the channel on with your thumb as you work along; a soft mallet helps on long runs
- Cut slightly over length with a sharp knife and push the ends together for a tight joint
- Ease it round gentle curves; on a tight corner, cut a V-notch in the base or butt two lengths
- For a permanent or vibration-proof fit, add a thin bead of sealant or adhesive in the slot
Questions
What edge thickness does it fit?
It is made for 2mm edges. Thinner material will sit loose; on 1mm sheet choose the 3mm x 9mm square U channel instead.
How does it differ from the 5mm x 9.5mm version?
Both fit 2mm edges. This one has thicker 2mm walls and deeper 10mm arms, so it grips more of the panel and absorbs harder knocks. The 5mm x 9.5mm is slimmer and lighter where space is tight.
Does it need glue?
Not usually. The 10mm sides grip a clean 2mm edge firmly on their own. Add adhesive only where there is heavy vibration or you want it permanent.
Can it go round curves and corners?
Yes, it follows gentle curves. For a tight 90° corner, notch the base or join two lengths at the corner.
Is it suitable outdoors, and what temperatures can it take?
Yes. TPE resists UV and weathering. The datasheet working range is -25°C to +70°C, so keep it away from ovens, exhausts and other hot surfaces.
How do I cut and join it?
A sharp knife or snips gives a clean square cut. Butt the ends tightly; for a sealed joint, add a dab of instant adhesive.
Is it food-safe?
No food-contact approval is claimed for this black TPE trim.
How accurate are the dimensions?
The cross-section is extruded to ISO 3302-1 class E2, so allow a few tenths of a millimetre either way on the nominal sizes.
When will it ship?
This trim is held in stock and ships in line with the dispatch times shown on this page.
Can I buy a shorter length?
This listing is a full 25m coil in black. For cut lengths or larger quantities, ask our team for a quote.
Need help choosing an edge trim? Contact our team on +44 1282 277786 or sales@industrial-polymers.co.uk.
Product details
| SKU | IP-TPEUC-6X12-BLACK |
|---|---|
| Weight | 3.31 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE Square U Channel – 6mm x 12mm for 2mm Panels – 25m Coil