
Rubber & FoamSKU IP-TPEU-4.5X8X1.5-STD
TPE U Channel – 4.5mm x 8mm for 1.5mm Edges – 100m Coil
A compact black TPE U channel for capping the raw edges of 1.5mm sheet: steel and aluminium panels, cabinet and enclosure sides, vending and kiosk panels, furniture and thin glazing. The profile is only 4.5mm across and 8mm tall, so it finishes an edge neatly without looking bulky. Two 6.5mm gripping arms with chamfered lead-in lips clamp both faces of the sheet, and the round 1.5mm base cushions knocks to the edge. Made from 60 Shore A thermoplastic elastomer, firm enough to hold its shape, and supplied as one continuous 100m coil.

At a glance
- Fits sheet and panels 1.5mm thick
- 4.5mm wide x 8mm high, 1.5mm slot with 6.5mm gripping arms, 1.5mm walls and base
- Round-bottom profile with chamfered lips for easy push-on fitting
- Thermoplastic elastomer (TPE), 60 Shore A: firm, holds its shape under knocks
- Service temperature -25°C to +70°C
- Resists weathering, UV, chemicals, flex fatigue, tearing and abrasion
- Cuts cleanly with a sharp knife; 100% recyclable thermoplastic
- 100m coil in black, about £6.13 per metre
Typical uses
- Capping sharp cut edges of 1.5mm sheet-metal panels, guards and enclosure covers
- Edge finishing on vending machines, kiosks, cabinets and shop-fitting panels
- Protecting the edges of thin glazing and acrylic in frames and displays
- Bumper edging on furniture, running boards and stair panels
- Protecting sheets, and the people handling them, during storage and transport
- Tight spaces where a bulky trim would get in the way: the profile is only 4.5mm wide

Which size do I need?
Measure the thickness of the edge you are covering and choose the channel whose slot matches it. Choose this one for 1.5mm sheet when you want a small, neat profile.
| U channel | Material | Fits edge thickness | Size (W x H) |
|---|---|---|---|
| TPE U Channel 3mm x 7mm | TPE, black | 1mm | 3 x 7mm |
| TPE U Channel 4.5mm x 8mm (this one) | TPE, black | 1.5mm | 4.5 x 8mm |
| TPE U Channel 4mm x 23mm | TPE, black | 2mm (deep grip) | 4 x 23mm |
| Silicone U Channel 4.1mm x 8mm | Silicone | 2mm | 4.1 x 8mm |
| TPE U Channel 8.5mm x 12mm | TPE | 1mm to 3mm | 8.5 x 12mm |
Specification
| Property | Value | Test method / basis |
|---|---|---|
| Profile and dimensions | ||
| Profile | Round-bottom U channel with chamfered lead-in lips (push-on edge trim) | Manufacturer's profile drawing |
| Overall width | 4.5 mm | Nominal |
| Overall height | 8 mm | Nominal |
| Slot (channel) width | 1.5 mm | Nominal |
| Gripping arm length / slot depth | 6.5 mm | Nominal |
| Wall thickness | 1.5 mm each side | Nominal (4.5 mm width less 1.5 mm slot) |
| Base thickness | 1.5 mm | Nominal (8 mm height less 6.5 mm arms) |
| Fits panel / edge (clamping range) | 1.5 mm only | Manufacturer's clamping range |
| Minimum bending radius | Approx. 50 mm at 20 °C | Manufacturer's datasheet diagram |
| Weight | Approx. 23 g per metre (about 2.3 kg per 100 m coil) | Manufacturer's datasheet |
| Dimensional tolerance | Class E2 (cross-section), L2 (length) | ISO 3302-1 |
| Material properties | ||
| Material | Thermoplastic elastomer (TPE) | – |
| Hardness | 60 Shore A | Shore A durometer (ISO 48-4) |
| Service temperature | -25 °C to +70 °C | Manufacturer's datasheet |
| Base compound temperature rating | -40 °C to +90 °C | Manufacturer's general rating for the TPE compound; design to the service range above |
| Resistance | Weathering, UV, general chemicals, flex fatigue, tear, abrasion | Manufacturer's description (qualitative) |
| Density, tensile strength, elongation, tear strength, compression set | Not published for this profile | Ask us if your specification needs them |
| Supply | ||
| Colour | Black | – |
| Unit of sale | One continuous 100 m coil | – |
| Part number | IP-TPEU-4.5X8X1.5-STD | – |
Material and compliance
This channel is extruded from a thermoplastic elastomer (TPE): a rubber-like material that flexes and recovers like rubber but, unlike vulcanised rubber, can be melted down and recycled. At 60 Shore A it is firm enough to resist compression and keep its shape on edges that take regular knocks.
- Dimensional tolerances: extruded to ISO 3302-1, cross-section class E2 and length class L2.
- Recyclable: the manufacturer states the material is 100% recyclable.
- No product approvals are stated for this profile: it is not offered as food-contact, drinking-water (WRAS) or fire-rated material. Ask us if you need an approved alternative.
How much do I need?
Add up every edge you want to cover and allow around 5% for trimming and joints. Example: forty 1.5mm cabinet side panels, each with two exposed 1.2m edges, need 96m, or about 101m with allowance. One 100m coil covers almost all of them.
Fitting tips
- Deburr the edge and wipe it with a degreaser first: the arms grip better on a clean edge
- Start at one end, set the chamfered lips on the edge and press the channel home with your thumb as you go; a rubber mallet helps on long runs
- Check the sheet reaches the bottom of the slot so the full 6.5mm of each arm is gripping
- Cut slightly over length with a sharp knife and push the ends together for a tight butt joint
Questions
Will it stay on without glue?
On a clean, deburred 1.5mm edge it is a firm push fit. For edges that are knocked often, or for a permanent fit, run a thin bead of flexible adhesive in the slot.
Will it fit 1mm or 2mm sheet?
It is made for 1.5mm only. On 1mm sheet it will be loose unless glued; use the TPE U channel 3mm x 7mm instead. 2mm sheet will force the arms apart; use the 4mm x 23mm TPE or the 4.1mm x 8mm silicone channel.
Can it go round corners and curves?
It follows curves down to about a 50mm radius at room temperature. For a sharp 90° corner, mitre the ends and butt two lengths together, or cut a small V-notch out of the arms so the base can bend.
What temperatures can it take?
It is rated for service from -25°C to +70°C. Keep it away from hot surfaces such as heaters, ovens or exhausts that run above 70°C; for those, choose a silicone channel.
Is it suitable for outdoor use?
Yes. TPE resists weathering and UV, so it can be used on outdoor panels, steps and running boards.
How do I cut and join it?
Cut square with a sharp knife or fine shears. Join lengths with a tight butt joint; a drop of flexible adhesive at the joint stops it opening up.
Can I use it on food equipment?
No food-contact approval is stated for this profile, so we do not recommend it where it may touch food. Ask us for an approved silicone channel.
Can I buy a shorter length or other colours?
This listing is a full 100m coil in black. For cut lengths or larger quantities, ask our team for a quote.
Need help choosing an edge trim or a seal? Contact our team.
Product details
| SKU | IP-TPEU-4.5X8X1.5-STD |
|---|---|
| Weight | 5.51 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE U Channel – 4.5mm x 8mm for 1.5mm Edges – 100m Coil