
Rubber & FoamSKU IP-TPEU-8.4X20X1.5-STD
TPE U Channel – 8.4mm x 20mm for 1.5mm Panels – 50m Coil
A deep, tapered black TPE U channel that pushes onto 1.5mm sheet and panel edges. The 15mm-deep slot grips the edge without glue, and the thick 8.4mm rounded base takes the knocks so the edge, and the people working near it, don't. Supplied as one continuous 50m coil (about £12.26 per metre inc VAT), held in stock in the UK.
At a glance
- Size: 8.4mm wide x 20mm high, tapered U with a solid round base
- Fits: 1.5mm edges (manufacturer's datasheet: 1mm to 1.5mm)
- Grip: 1.5mm slot, 15mm deep, so 15mm of each face is covered
- Material: thermoplastic elastomer (TPE), 60 Shore A, black
- Push-on: no adhesive needed in normal use; removable and re-fittable
- Cuts cleanly with a knife or shears; offcuts are recyclable
Technical drawing

Specifications
| Property | Value | Source / test method |
|---|---|---|
| Profile | Tapered U channel, solid round base | Manufacturer's drawing |
| Overall width (max., at base) | 8.4 mm | Manufacturer's product data (datasheet drawing shows 8.5 mm) |
| Overall height | 20.0 mm | Manufacturer's drawing |
| Slot width | 1.5 mm | Manufacturer's drawing |
| Slot depth (grip on each face) | 15.0 mm | Manufacturer's datasheet drawing |
| Solid base below slot | 5.0 mm (20 − 15) | Derived from the two dimensions above |
| Width at the lips | ≈ 4.5 mm | Scaled from the manufacturer's drawing, not a stated dimension |
| Wall thickness | 1 mm (as listed by the manufacturer; position not defined) | Manufacturer's technical data |
| Panel / edge thickness it fits | 1.5 mm (datasheet clamping range 1 – 1.5 mm) | Manufacturer's product data and datasheet |
| Material | Thermoplastic elastomer (TPE) | Manufacturer's datasheet |
| Hardness | 60 Shore A | Manufacturer's datasheet (Shore A durometer) |
| Colour | Black | Manufacturer's datasheet |
| Use temperature (design range) | −25 °C to +70 °C | Manufacturer's datasheet |
| Temperature, web listing | −40 °C to +90 °C | Manufacturer's product page (wider than the datasheet; we quote the datasheet figure) |
| Dimensional tolerance | ISO 3302-1 class E2 (cross-section) / L2 (length) | ISO 3302-1 |
| Length | 50 m continuous coil | — |
| Weight per metre | Not stated by the manufacturer | — |
| Density, tensile strength, elongation, tear, compression set | Not published for this profile | Ask us if you need a material certificate |
Materials and compliance
This profile is made from a black thermoplastic elastomer (TPE) at 60 Shore A: firm enough to hold its shape and resist impact, flexible enough to follow gentle curves. The manufacturer describes the material as having good resistance to flex fatigue, tearing, abrasion and many chemicals, and as 100% recyclable.
The manufacturer does not state any food-contact (FDA, EC 1935/2004), WRAS, REACH or RoHS approval for this product, so we make no such claim. If your application needs a declaration, contact us before ordering.
How it fits

- Deburr the edge and wipe off oil or grease so the slot can seat fully.
- Start at one end and press the trim down onto the edge with your thumb or a rubber mallet, working along. Don't stretch it as you go, or it will shrink back and leave gaps.
- Cut square with a sharp knife or shears. On outside corners, mitre at 45° or cut a V-notch out of the base and bend it round.
- Where there is heavy vibration, run a thin bead of contact adhesive in the slot.
Shown to scale

Typical uses
- Safety edging on 1.5mm sheet metal guards, enclosures, cabinets and fabrications
- Finishing thin glazing and panel edges
- Running boards, stair and step edges
- Furniture and display panel edges
- Vending machine and kiosk panels
- Protecting sheet edges in storage and transport
How much do I need?
Add up the edge length and allow about 5% for cutting. Example: 30 guard panels with a 900mm top edge = 27m, or about 28.4m with the allowance. One 50m coil covers it with around 21m to spare.
Other sizes for thin edges
| Size | Edge it fits | Choose it for |
|---|---|---|
| 4.5 x 8mm | 1.5mm | Small, neat trim |
| 4.5 x 12mm | 1.5mm | Slim trim, deeper grip |
| 5.6 x 9.8mm | 1.5mm | Mid-size trim |
| 8.4 x 20mm (this item) | 1.5mm | Deepest grip and a thick cushioned edge |
| 6 x 23.5mm | 1 – 3mm | Very deep grip, slimmer edge |
| 10 x 21mm | 2.5mm | Slightly thicker sheet |
| 8.5 x 25mm | 4mm | Thicker panels |
Frequently asked questions
What panel thickness does it fit?
It is made for 1.5mm edges. The manufacturer's datasheet gives a clamping range of 1mm to 1.5mm, so it will also hold on 1mm sheet, though less tightly. For 2.5mm sheet use the 10 x 21mm size; for 4mm, the 8.5 x 25mm.
Do I need glue?
Not usually. The 15mm-deep slot grips both faces of the edge. Use a thin bead of contact adhesive only where there is strong vibration or frequent knocks along the length.
How do I measure what I need?
Measure your edge thickness with calipers (it should be 1 – 1.5mm), then the total edge length, plus about 5% for cutting. The trim adds 8.4mm to the edge width and sits 5mm proud of the edge.
How do I cut and join it?
Cut with a sharp knife, shears or a fine-toothed saw. Mitre corners at 45°, or notch the base for gentle bends. Butt joints can be closed with a drop of cyanoacrylate (superglue) suitable for rubber.
What temperatures can it take?
The manufacturer's datasheet gives −25 °C to +70 °C. Their web page quotes −40 °C to +90 °C; we recommend designing to the datasheet range.
Is it suitable outdoors?
TPE copes well with weather and flexing. For long-term outdoor use in strong sun, ask us and we'll suggest an EPDM option if one suits better.
Is it food-safe or certified?
No food-contact or other approvals are stated for this profile, so don't use it where food contact certification is required.
Can I get a shorter length or another colour?
This listing is a 50m black coil. Contact us for cut lengths or other options.
Need help choosing? Call +44 1282 277786 or email sales@industrial-polymers.co.uk.
Product details
| SKU | IP-TPEU-8.4X20X1.5-STD |
|---|---|
| Weight | 13.23 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE U Channel – 8.4mm x 20mm for 1.5mm Panels – 50m Coil