
Rubber & FoamSKU IP-TPEU-5X7X1-STD
TPE U Channel – 5mm x 7mm for 1mm Edges – 100m Coil
A neat black TPE U channel for capping the cut edges of 1mm sheet: steel and aluminium panels, enclosure doors, cabinet sides, shop-fitting and display panels, machine covers and thin plastic sheet. The profile is a 5mm-wide teardrop: a 1mm parallel slot runs 5mm deep between two tapered arms, and below it sits a solid Ø5mm round base, 2mm thick under the slot. The base is the part that takes the knocks, so the most exposed edge of the sheet gets the most material. Made from 60 Shore A thermoplastic elastomer, it weighs just 26g per metre and comes as one continuous 100m coil.

At a glance
- Fits sheet and panels 1mm thick (clamping range 1mm only)
- 5mm wide x 7mm high, with a round Ø5mm cushioned base
- 1mm slot, 5mm deep: each arm grips 5mm down the face of the sheet
- Thermoplastic elastomer (TPE), 60 Shore A, 26g/m
- Datasheet use temperature -25°C to +70°C
- Resists weathering, UV, chemicals, tearing and abrasion
- Cuts cleanly with a sharp knife; 100% recyclable thermoplastic
- 100m coil in black, about £6.13 per metre
Typical uses
- Capping sharp cut edges of 1mm sheet-metal panels, guards and enclosure covers
- Edge finishing on cabinets, kiosks, display stands and shop-fitting panels
- Finishing the edges of thin plastic, laminate and composite sheet
- Protecting light-gauge sheets, and the people handling them, in storage and transport
- Long production runs where one 100m coil covers a whole batch of panels

Which size do I need?
Measure the thickness of the edge you are covering and choose the channel whose slot matches it. Choose this one for 1mm sheet when you want a rounded, cushioned edge that is a little bolder than the slimmest trims.
| U channel | Material | Fits edge thickness | Size (W x H) |
|---|---|---|---|
| TPE U Channel 3mm x 7mm | TPE, black | 1mm, slim | 3 x 7mm |
| TPE Square U Channel 3mm x 9mm | TPE, black | 1mm, square edge | 3 x 9mm |
| TPE U Channel 5mm x 7mm (this one) | TPE, black | 1mm, round cushioned base | 5 x 7mm |
| TPE U Channel 4.5mm x 8mm | TPE, black | 1.5mm | 4.5 x 8mm |
| TPE U Channel 5mm x 6mm | TPE, black | 2mm | 5 x 6mm |
| TPE U Channel 9mm x 13mm | TPE | 1mm to 2.5mm | 9 x 13mm |
| TPE U Channel 8.5mm x 12mm | TPE | 1mm to 3mm | 8.5 x 12mm |
Specification
| Property | Value | Test method / basis |
|---|---|---|
| Profile and dimensions | ||
| Profile | Teardrop U channel with round base and parallel slot (push-on edge protector) | Manufacturer's profile drawing |
| Overall width (widest point) | 5 mm | Nominal |
| Overall height | 7 mm | Nominal |
| Base | Ø5 mm round | Nominal |
| Slot width | 1 mm (parallel sides) | Nominal |
| Slot depth / gripping arm length | 5 mm | Nominal |
| Base thickness under the slot | 2 mm (7 mm height less 5 mm slot) | Derived from nominal dimensions |
| Thickness at thickest point | 3 mm | Manufacturer's stated value |
| Fits panel / edge (clamping range) | 1 mm only | Manufacturer's clamping range |
| Bending | Follows bends from 50 mm radius | Manufacturer's datasheet illustration (50, 100 and 150 mm radii shown) |
| Dimensional tolerance | Class E2 (cross-section), L2 (length) | ISO 3302-1, quality level 2 |
| Material properties | ||
| Material | Thermoplastic elastomer (TPE) | – |
| Hardness | 60 Shore A | Shore A durometer (ISO 48-4) |
| Weight | 26 g per metre (about 2.6 kg per 100 m coil) | Manufacturer's datasheet |
| Use temperature | -25 °C to +70 °C | Manufacturer's datasheet (the product page quotes a wider -40 °C to +90 °C; we list the more cautious datasheet figure) |
| Resistance | Weathering, UV, general chemicals, tear, abrasion | Manufacturer's description (qualitative) |
| Density, tensile strength, elongation, tear strength, compression set | Not published for this profile | Ask us if your specification needs them |
| Supply | ||
| Colour | Black | – |
| Unit of sale | One continuous 100 m coil | – |
| Price per metre | Approx. £6.13 inc VAT | £612.90 ÷ 100 m |
| Part number | IP-TPEU-5X7X1-STD | – |
Material and compliance
This channel is extruded from a thermoplastic elastomer (TPE): a rubber-like material that flexes and recovers like rubber but, unlike vulcanised rubber, can be melted down and recycled. It can stay stretched or compressed on an edge for long periods and still return to shape, so the grip does not slacken over time. At 60 Shore A it is firm enough to hold its round shape on edges that take regular knocks.
- Dimensional tolerances: extruded to ISO 3302-1, quality level 2 (cross-section class E2, length class L2).
- Recyclable: the manufacturer states the material is 100% recyclable.
- No product approvals are stated for this profile: it is not offered as food-contact, drinking-water (WRAS) or fire-rated material. Ask us if you need an approved alternative.

How much do I need?
Add up every edge you want to cover and allow around 5% for trimming and joints. Example: forty 1mm enclosure panels, each with two exposed 1.2m edges, need 96m, or about 100m with allowance: one coil.
Fitting tips
- Deburr the edge and wipe it with a degreaser first: the arms grip better on a clean, smooth edge
- Start at one end, set the slot on the edge and press the channel home with your thumb as you go; a rubber mallet helps on long runs
- Check the sheet reaches the bottom of the slot so the full 5mm of each arm is gripping
- Cut slightly over length with a sharp knife and push the ends together for a tight butt joint
Questions
Will it stay on without glue?
Yes, on a clean, deburred 1mm edge: the 1mm slot is a snug fit and the arms grip 5mm down each face. For edges that are knocked or pulled often, or for a permanent fit, run a thin bead of flexible adhesive in the slot.
Will it fit 0.8mm or 1.5mm sheet?
It is made for 1mm only. On thinner sheet it will be loose unless you glue it; 1.5mm sheet will not go in properly. For 1.5mm use the TPE U channel 4.5mm x 8mm, and for mixed thicknesses from 1mm to 3mm use the TPE U channel 8.5mm x 12mm.
How does it compare with the 3mm x 7mm channel for 1mm sheet?
Both fit 1mm. The 3mm x 7mm is the slimmest, near-invisible option. This 5mm x 7mm has a fuller round base that stands out as a bead and cushions knocks better, and it comes on a longer 100m coil.
Can it go round corners and curves?
It follows curves of about 50mm radius and larger. For a sharp 90° corner, mitre the ends and butt two lengths together, or cut a small V-notch out of the arms so the base can bend.
What temperatures can it take?
The manufacturer's datasheet gives a use range of -25°C to +70°C, and that is the range we recommend designing to. Keep it away from heaters, ovens and exhausts; for hot surfaces, choose a silicone channel.
Is it suitable for outdoor use?
Yes. TPE has excellent weathering and UV resistance, so it can be used on outdoor panels, covers and signage edges.
How do I cut and join it?
Cut square with a sharp knife or fine shears. Join lengths with a tight butt joint; a drop of flexible adhesive at the joint stops it opening up.
Can I use it on food equipment?
No food-contact approval is stated for this profile, so we do not recommend it where it may touch food. Ask us for an approved alternative.
Can I buy a shorter length or other colours?
This listing is a full 100m coil in black. For cut lengths or larger quantities, ask our team for a quote.
Need help choosing an edge trim or a seal? Contact our team.
Product details
| SKU | IP-TPEU-5X7X1-STD |
|---|---|
| Weight | 6.61 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE U Channel – 5mm x 7mm for 1mm Edges – 100m Coil