
Rubber & FoamSKU IP-TPEU-5.6X9.8X1.5-STD
TPE U Channel – 5.6mm x 9.8mm for 1.5mm Edges – 50m Coil
A sturdy black TPE U channel for capping the cut edges of 1.5mm sheet: steel and aluminium panels, machine guards, enclosure doors, vending and kiosk cabinets, furniture panels, stair nosings and glazing edges. The profile is 5.6mm wide and 9.8mm tall. A 1.5mm tapered slot runs about 7mm deep between two long gripping arms, and below it sits a solid Ø5.6mm round base, 2.7mm thick under the slot. That thick, rounded base faces outward, so the most exposed edge gets the most cushioning. Made from 60 Shore A thermoplastic elastomer, it weighs 43g per metre and comes as one continuous 50m coil.

At a glance
- Fits sheet and panels 1.5mm thick (clamping range 1.5mm only)
- 5.6mm wide x 9.8mm high, with a round Ø5.6mm cushioned base
- Tapered 1.5mm slot about 7mm deep: long arms grip well down each face, usually with no adhesive
- 2.7mm of solid material over the edge, and over 2mm in each side wall, to soak up knocks
- Thermoplastic elastomer (TPE), 60 Shore A, 43g/m
- Datasheet use temperature -25°C to +70°C
- Resists weathering, UV, chemicals, flex fatigue, tearing and abrasion
- Cuts cleanly with a sharp knife; 100% recyclable thermoplastic
- 50m coil in black, about £10.01 per metre
Typical uses
- Capping sharp cut edges of 1.5mm sheet-metal guards, covers and enclosure panels
- Edge finishing on vending machines, kiosks, cabinets and display units
- Protecting glazing and acrylic edges, running boards and furniture panels
- Stair and step edges made from 1.5mm sheet
- Protecting sheets, and the people handling them, in storage and transport

Which size do I need?
Measure the thickness of the edge you are covering and choose the channel whose slot matches it. For 1.5mm sheet, choose this one when you want the fullest, most cushioned round edge of our 1.5mm channels.
| U channel | Material | Fits edge thickness | Size (W x H) |
|---|---|---|---|
| TPE U Channel 5mm x 7mm | TPE, black | 1mm | 5 x 7mm |
| TPE U Channel 4.5mm x 8mm | TPE, black | 1.5mm, slim | 4.5 x 8mm |
| TPE U Channel 4.5mm x 12mm | TPE, black | 1.5mm, deep grip | 4.5 x 12mm |
| TPE U Channel 5.6mm x 9.8mm (this one) | TPE, black | 1.5mm, thick round base | 5.6 x 9.8mm |
| TPE U Channel 5mm x 6mm | TPE, black | 2mm | 5 x 6mm |
| TPE Square U Channel 5mm x 9.5mm | TPE, black | 2mm, square edge | 5 x 9.5mm |
| TPE U Channel 9mm x 13mm | TPE | 1mm to 2.5mm | 9 x 13mm |
Specification
| Property | Value | Test method / basis |
|---|---|---|
| Profile and dimensions | ||
| Profile | U channel with round base and tapered inner slot (push-on edge protector) | Manufacturer's profile drawing |
| Overall width (widest point) | 5.6 mm | Nominal |
| Overall height | 9.8 mm | Nominal |
| Base | Ø5.6 mm round | Nominal |
| Slot width | 1.5 mm, tapered for grip | Nominal |
| Slot depth / gripping arm length | About 7.1 mm (manufacturer: "over 7 mm") | Derived: 9.8 mm height less 2.7 mm base |
| Thickness of base under the slot | 2.7 mm | Manufacturer's stated thickness |
| Side wall thickness at widest point | About 2 mm each side | Derived: (5.6 − 1.5) ÷ 2 |
| Fits panel / edge (clamping range) | 1.5 mm only | Manufacturer's clamping range |
| Dimensional tolerance | Class E2 (cross-section), L2 (length) | ISO 3302-1, quality level 2 |
| Material properties | ||
| Material | Thermoplastic elastomer (TPE) | – |
| Hardness | 60 Shore A | Shore A durometer (ISO 48-4) |
| Weight | 43 g per metre (about 2.15 kg per 50 m coil) | Manufacturer's datasheet |
| Use temperature | -25 °C to +70 °C | Manufacturer's datasheet (the product page quotes a wider -40 °C to +90 °C; we list the more cautious datasheet figure) |
| Resistance | Weathering, UV, general chemicals, flex fatigue, tear, abrasion | Manufacturer's description (qualitative) |
| Density, tensile strength, elongation, tear strength, compression set | Not published for this profile | Ask us if your specification needs them |
| Supply | ||
| Colour | Black | – |
| Unit of sale | One continuous 50 m coil | – |
| Price per metre | Approx. £10.01 inc VAT | £500.31 ÷ 50 m |
| Part number | IP-TPEU-5.6X9.8X1.5-STD | – |
Material and compliance
This channel is extruded from a thermoplastic elastomer (TPE): a rubber-like material that flexes and recovers like rubber but, unlike vulcanised rubber, can be melted down and recycled. It can stay stretched or compressed on an edge for long periods and still return to shape, so the grip does not slacken over time. At 60 Shore A it is firm enough to hold its round shape on edges that take regular knocks.
- Dimensional tolerances: extruded to ISO 3302-1, quality level 2 (cross-section class E2, length class L2).
- Recyclable: the manufacturer states the material is 100% recyclable.
- No product approvals are stated for this profile: it is not offered as food-contact, drinking-water (WRAS) or fire-rated material. Ask us if you need an approved alternative.

How much do I need?
Add up every edge you want to cover and allow around 5% for trimming and joints. Example: twenty 1.5mm machine guards, each with two exposed 1.2m edges, need 48m, or about 50m with allowance: one coil.
Fitting tips
- Deburr the edge and wipe it with a degreaser first: the arms grip better on a clean, smooth edge
- Start at one end, set the slot on the edge and press the channel home with your thumb as you go; a rubber mallet helps on long runs
- Check the sheet reaches the bottom of the slot so the full 7mm of each arm is gripping
- Cut slightly over length with a sharp knife and push the ends together for a tight butt joint
Questions
Will it stay on without glue?
Yes, on a clean, deburred 1.5mm edge: the tapered slot squeezes the sheet and the long arms grip about 7mm down each face. For edges that are knocked or pulled often, or for a permanent fit, run a thin bead of flexible adhesive in the slot.
Will it fit 1mm or 2mm sheet?
It is made for 1.5mm only. On 1mm sheet it will be loose unless you glue it, and 2mm sheet will not go in properly. For 1mm use the TPE U channel 5mm x 7mm; for 2mm use the TPE U channel 5mm x 6mm; for mixed thicknesses from 1mm to 2.5mm use the TPE U channel 9mm x 13mm.
How does it compare with the 4.5mm x 8mm channel for 1.5mm sheet?
Both fit 1.5mm. The 4.5mm x 8mm is slimmer and lighter. This 5.6mm x 9.8mm has a thicker 2.7mm round base and longer arms, so it cushions knocks better and grips further down the face.
Can it go round corners and curves?
Yes, it flexes around gentle curves. For a sharp 90° corner, mitre the ends and butt two lengths together, or cut a small V-notch out of the arms so the base can bend.
What temperatures can it take?
The manufacturer's datasheet gives a use range of -25°C to +70°C, and that is the range we recommend designing to. Keep it away from heaters, ovens and exhausts; for hot surfaces, choose a silicone channel.
Is it suitable for outdoor use?
Yes. TPE has excellent weathering and UV resistance, so it can be used on outdoor guards, covers, glazing and signage edges.
How do I cut and join it?
Cut square with a sharp knife or fine shears. Join lengths with a tight butt joint; a drop of flexible adhesive at the joint stops it opening up.
Can I use it on food equipment?
No food-contact approval is stated for this profile, so we do not recommend it where it may touch food. Ask us for an approved alternative.
Can I buy a shorter length or other colours?
This listing is a full 50m coil in black. For cut lengths or larger quantities, ask our team for a quote.
Need help choosing an edge trim or a seal? Contact our team.
Product details
| SKU | IP-TPEU-5.6X9.8X1.5-STD |
|---|---|
| Weight | 4.85 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE U Channel – 5.6mm x 9.8mm for 1.5mm Edges – 50m Coil