
Rubber & FoamSKU IP-TPEU-5X6X2-STD
TPE U Channel – 5mm x 6mm for 2mm Edges – 50m Coil
A low-profile black TPE U channel for finishing and protecting the raw edges of 2mm sheet: steel and aluminium panels, vending machine and kiosk panels, cabinet sides, furniture, running boards and glazing edges. At only 5mm wide and 6mm tall it adds almost nothing to the edge, so it suits tight gaps where a bulky trim would get in the way. The slot is 2mm wide at the bottom and narrows towards the mouth, so the arms pinch both faces of the sheet and hold on without adhesive. Under the slot sits a thick 2mm round base that takes knocks on the most exposed part of the edge. Made from 60 Shore A thermoplastic elastomer and supplied as one continuous 50m coil.

At a glance
- Fits sheet and panels 2mm thick
- 5mm wide x 6mm high: one of the smallest trims for 2mm edges
- 2mm slot, 4mm deep, tapering towards the mouth for a self-gripping push fit
- Thick 2mm round base absorbs impacts where edges get hit most
- Thermoplastic elastomer (TPE), 60 Shore A
- Temperature range -40°C to +90°C
- Resists weathering, chemicals, flex fatigue, tearing and abrasion
- Cuts cleanly with a sharp knife; 100% recyclable thermoplastic
- 50m coil in black, about £9.81 per metre
Typical uses
- Capping sharp cut edges of 2mm sheet-metal panels, guards and enclosure covers
- Edge finishing on vending machines, kiosks, cabinets and shop-fitting panels
- Protecting the edges of glazing and acrylic sheet in frames and displays
- Bumper edging on furniture, running boards and stair panels
- Protecting sheets, and the people handling them, during storage and transport
- Narrow gaps and close-fitting assemblies where only a 5mm-wide trim will fit

Which size do I need?
Measure the thickness of the edge you are covering and choose the channel whose slot matches it. Choose this one for 2mm sheet when you want the smallest, neatest profile with a cushioned base.
| U channel | Material | Fits edge thickness | Size (W x H) |
|---|---|---|---|
| TPE U Channel 3mm x 7mm | TPE, black | 1mm | 3 x 7mm |
| TPE U Channel 4.5mm x 8mm | TPE, black | 1.5mm | 4.5 x 8mm |
| TPE U Channel 5mm x 6mm (this one) | TPE, black | 2mm, low profile | 5 x 6mm |
| TPE U Channel 4mm x 23mm | TPE, black | 2mm, deep grip | 4 x 23mm |
| Silicone U Channel 4.1mm x 8mm | Silicone | 2mm | 4.1 x 8mm |
| TPE U Channel 8.5mm x 12mm | TPE | 1mm to 3mm | 8.5 x 12mm |
Specification
| Property | Value | Test method / basis |
|---|---|---|
| Profile and dimensions | ||
| Profile | Round-bottom U channel with tapered slot (push-on edge trim) | Manufacturer's profile drawing |
| Overall width (widest point) | 5 mm | Nominal |
| Overall height | 6 mm | Nominal |
| Slot width at base | 2 mm | Nominal |
| Slot width at mouth | Approx. 1 mm (slot tapers 2 mm to 1 mm) | Manufacturer's description; scaled from profile drawing |
| Slot depth / gripping arm length | 4 mm | Nominal (6 mm height less 2 mm base) |
| Base thickness | 2 mm (thickest point of the profile) | Nominal |
| Fits panel / edge (clamping range) | 2 mm only | Manufacturer's clamping range |
| Dimensional tolerance | Class E2 (cross-section), L2 (length) | ISO 3302-1 |
| Material properties | ||
| Material | Thermoplastic elastomer (TPE) | – |
| Hardness | 60 Shore A | Shore A durometer (ISO 48-4) |
| Minimum temperature | -40 °C | Manufacturer's rating |
| Maximum temperature | +90 °C | Manufacturer's rating |
| Resistance | Weathering, general chemicals, flex fatigue, tear, abrasion | Manufacturer's description (qualitative) |
| Density, tensile strength, elongation, tear strength, compression set | Not published for this profile | Ask us if your specification needs them |
| Supply | ||
| Colour | Black | – |
| Unit of sale | One continuous 50 m coil | – |
| Price per metre | Approx. £9.81 inc VAT | £490.29 ÷ 50 m |
| Part number | IP-TPEU-5X6X2-STD | – |
Material and compliance
This channel is extruded from a thermoplastic elastomer (TPE): a rubber-like material that flexes and recovers like rubber but, unlike vulcanised rubber, can be melted down and recycled. It can stay stretched or compressed on an edge for long periods and still return to shape, so the grip does not slacken over time. At 60 Shore A it is firm enough to keep its shape on edges that take regular knocks.
- Dimensional tolerances: extruded to ISO 3302-1, cross-section class E2 and length class L2.
- Recyclable: the manufacturer states the material is 100% recyclable.
- No product approvals are stated for this profile: it is not offered as food-contact, drinking-water (WRAS) or fire-rated material. Ask us if you need an approved alternative.
How much do I need?
Add up every edge you want to cover and allow around 5% for trimming and joints. Example: twenty 2mm machine-guard panels, each with two exposed 1.2m edges, need 48m, or about 50m with allowance: one coil.
Fitting tips
- Deburr the edge and wipe it with a degreaser first: the arms grip better on a clean edge
- Start at one end, set the narrow mouth on the edge and press the channel home with your thumb as you go; a rubber mallet helps on long runs
- Check the sheet reaches the bottom of the slot so the full 4mm of each arm is gripping
- Cut slightly over length with a sharp knife and push the ends together for a tight butt joint
Questions
Will it stay on without glue?
Yes, on a clean, deburred 2mm edge. The slot narrows towards the mouth, so the arms pinch the sheet. For edges that are knocked often, or for a permanent fit, run a thin bead of flexible adhesive in the slot.
Will it fit 1.5mm or 3mm sheet?
It is made for 2mm only. On 1.5mm sheet it will be loose; use the TPE U channel 4.5mm x 8mm. 3mm sheet will not go in; use the TPE U channel 8.5mm x 12mm, which takes 1mm to 3mm.
How does it compare with the 4mm x 23mm channel for 2mm sheet?
This one is short and neat, with a thick cushioned base. The 4mm x 23mm has much longer arms that grip further down the sheet, which suits edges that are pulled or snagged. Choose by how much the trim can stand proud of the panel.
Can it go round corners and curves?
It follows gentle curves. For a sharp 90° corner, mitre the ends and butt two lengths together, or cut a small V-notch out of the arms so the base can bend.
What temperatures can it take?
It is rated from -40°C to +90°C. Keep it away from surfaces such as heaters, ovens or exhausts that run hotter; for those, choose a silicone channel.
Is it suitable for outdoor use?
Yes. TPE has excellent weathering resistance, so it can be used on outdoor panels, steps and running boards.
How do I cut and join it?
Cut square with a sharp knife or fine shears. Join lengths with a tight butt joint; a drop of flexible adhesive at the joint stops it opening up.
Can I use it on food equipment?
No food-contact approval is stated for this profile, so we do not recommend it where it may touch food. Ask us for an approved silicone channel.
Can I buy a shorter length or other colours?
This listing is a full 50m coil in black. For cut lengths or larger quantities, ask our team for a quote.
Need help choosing an edge trim or a seal? Contact our team.
Product details
| SKU | IP-TPEU-5X6X2-STD |
|---|---|
| Weight | 2.2 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE U Channel – 5mm x 6mm for 2mm Edges – 50m Coil